Low High Pressure Boiler Economizer with Finned Tubes and Max 60t/h Steam Production
製品詳細
| タイプ: | 自然な循環 | 構造: | 火管と水管 |
|---|---|---|---|
| プレッシャー: | 低い/高圧 | 蒸気生産: | 最大 60t/h |
| スタイル: | 垂直 | 燃料: | 石炭火力 |
| 出力: | 熱湯/蒸気 | 表面処理: | 塗装 |
| 裸のパイプOD: | 25-1650 mm | 裸のパイプの厚さ: | 2-40 mm |
| フィンの厚さ: | 0.6〜3.0mm | フィンの高さ: | 5-30 mm |
| フィンチューブピッチ: | 5-30 mm | フィンチューブの長さ: | ≤12000mm |
| 材料: | 炭素鋼、合金、オーステナイト鋼 | ||
| ハイライト |
Max 60t/h Steam Production Boiler Economizer,Low High Pressure Boiler Economizer,Finned Tubes Boiler Economizer |
||
製品説明
| Name (unit) | Specification (mm) |
|---|---|
| Bare pipe (OD) | 25-1650 |
| Bare pipe (Thickness) | 2-40 |
| Fin (Thickness) | 0.6-3.0 |
| Fin (Height) | 5-30 |
| Fin tube thread pitch | 5-30 |
| Fin tube length | ≤12000 |
- Impact test and Strength calculation report with applied materials information
- 100% NDT (non-destructive inspection) report of steel plate, tube and electrode
- X-ray, γ-ray and liquid penetrant test inspection report (welding seam) to ensure quality
- Hydraulic test report to ensure standard working pressure and safety
製品のハイライト
Low / High Pressure Flue Gas Boiler Economizer Heat Exchanger Devices With Finned Tubes Boiler Economizer Introduction The economizer performs a key function in providing high overall boiler thermal efficiency by recovering low-level energy from flue gas before it's exhausted to the atmosphere. It ...
高圧電源ボイラー 表面膜壁の暖房 バイオマスボイラーのためのアルゴン弧溶接
High Pressure Power Boiler Heating Surface Membrane Wall Argon Arc Welding For Biomass Boiler Product Introduction Water wall panels with pins usually laid vertically on the inner wall of the furnace wall, it is mainly used to absorb the radiant heat emitted by the flame and high-temperature flue gas in the furnace.It is the main type of evaporating heating surface of all kinds of modern boilers and the basic component of boiler water circulation loop.Because of both cooling
高周波溶接 Hフィンチューブエコノマイザー 発電所のボイラー ASME
High Frequency Welding H Fin Tube Economizer For Power Plant Boiler ASME Product Description The boiler economizer is a device used to recover waste heat in industrial boilers, usually located at the tail of the flue of the boiler, which increases the feed water temperature and reduces fuel consumption by absorbing the heat of the flue gas, so as to achieve the effect of energy saving and emission reduction. But at the same time, as an environmental protection equipment, the
炭素鋼SA192 超熱コイル アルゴン弧溶接 100% PT
Product Description: A boiler superheater is an essential component in a boiler system, responsible for increasing the temperature of steam produced by the boiler. One of the key products in this category is the Superheater Coil, designed to enhance the efficiency and performance of boiler systems. This particular superheater is suitable for various fuels, including coal, oil, and biomass, making it versatile and adaptable to different energy sources. The Superheater Coil
ボイラー産業用 SA210A1 鉄鋼ボイラー経済化器 熱交換部品 ASME認証
Boiler Industrial SA210A1 Steel Boiler Economizer Heat Exchange Part ASME Certification Introduction The H-shaped finned tube is also known as the H-shaped fin tube, also known as the butterfly fin tube. It is to weld symmetrically two pieces of steel with an arc in the middle to form fins (ribs or butterflies), the frontal shape of which resembles the letter "H", so it is called the H-shaped finned tube. The two fins of the H-shaped fin tube are rectangular and approximately
オンラインで問い合わせの連絡先フォームをご利用ください. 質問があれば,私たちのチームはできるだけ早く連絡します.
